Muifa Split Heatpump( R410A)

    Muifa Split Heatpump( R410A)

    DC inverter air source heat pump

    CALASSIC DESIGN RELIABLE AND STABLE

    The classic MUIFA series air source heat pump, combined with full DC inverter technology and EVI jet enthalpy, makes product performance in leading position in heat pump industry. More importantly, this makes the MUIFA series heat pump running super steadily, even in + 51 °C to 25 °C or bad environment, can be all-weather after meet heating, cooling and domestic hot water needs.

    The product meets the requirements of European Union CE safety regulations, and the energy efficiency ratio of the product reaches the A++ level of eu EN14511 and China’s dual-level energy efficiency (COP&IPLV) standard, which greatly reduces the energy bill of customers.

    ENHANCED VAPOR INJECTION (EVI) 

    TECHNOLOGY TO FURTHER 

    IMPROVE PERFORMANCE


    As the compression process adopts the injection enthalpy increasing 

    technology (EVI), the compression can be realized twice with one 

    compressor. This innovative technology brings significant energy 

    efficiency improvements to the Muifa heat pump, effectively increasing 

    heat production at low temperatures, increasing reliability, and even 

    eliminating the use of electrical heat. On the other hand, EVI technology 

    also improves the cooling capacity of the heat pump in the high 

    temperature environment.


    1706079655873256.png

    WIDE INVERTER RANGE, 

    EVEN DON'T NEED BUFFER TANK FOR SYSTEM


    Thanks to the unique low-frequency compressor oil return technology, the 

    minimum output capacity of Muilfa heat pump can be as low as 25%, the 

    compressor will not start and stop frequently, the system does not need to 

    install heavy buffer water tank, greatly saving the installation space and cost.





    1706079829138010.png


    ADJUSTABLE OUTLET WATER TEMPERATURE, FIT FOR RADIATE COOLING SYSTEM


    Using the precise PID control technology, Muifa heat pump can sense the load change of the system in advance and adjust the output power in time. With radiation refrigeration or double mu sensorless cold beam system, through the open communication interface of the heat pump, the required water temperature can be directly output (cooling water temperature range of 5 -- 25℃), the control accuracy can reach ±0.3℃, without the need for expensive and complex water mixing device.



    1706079946923774.png




    EQUIP WITH W-SOUL DHW FUNCTION


    With the help of EVI technology, without auxiliary electric heating, the 

    domestic outlet water temperature can easily reach 55°C, even if the 

    external temperature is as low as -20°C.


    1705715911304108.png

    CE CERTIFIED BY TUV


    According to the CE safety regulations of the European Union, electrical 

    appliances can not pose a safety threat to human body, their stable 

    operation is not subject to external interference, and can not interfere 

    with other equipment in the power grid. Muifa heat pump has been 

    certified by German TUV to ensure safe and stable operation.


    1706080173219594.png


    M-SOURCE MULTI-ENERGY MANAGEMENT BRING HIGHER SYSTEM RELIABILITY


    Today's air source heat pump technology is mature and reliable, is one of the most energy-saving heating methods. However, the air source heat pump is 

    easily affected by the outdoor environment. As the outdoor temperature decreases, the heating efficiency and capacity of the heat pump decrease. This is 

    an inherent characteristic determined by the operating principle of the heat pump.


    In a heat pump system, the heat pump can operate efficiently for most of the heating season, extracting free heat from outdoor air to meet your heating 

    needs and saving you a lot on your energy bill. But heat pumps can run out of steam in extreme climates. It's important to have a second reservoir as a backup.

    The safety and reliability of heating system is more important than energy saving, which is what we always insist on. The Muifa heat pump is equipped with 

    m-source multi-energy management program, which can be easily and efficiently managed whether you use a small gas-fired boiler or a wood-burning pellet 

    boiler as a backup heat source.


    M-source can automatically start and stop the backup heat source according to the system requirements, so as to ensure the efficient and stable operation 

    of your system. You can even add solar heating to your system to take advantage of nature's heat.


    1706080391589037.png



    SECONDARY WATER CIRCUIT


    The indoor unit is built with heat pump primary side circulating water 

    pump and coupling water tank of primary and secondary systems. The 

    secondary circulating pump is configured according to the pipeline 

    condition of the system during field installation.


    1706080555393999.png




    尺寸.svg

    参数.svg

    European design
    Our heat pumps are designed in Belgium with top energy saving and efficiency.
    Development and production in China
    With high efficiency R&D and integrated supply chain in China our new generations of heat pump can launch the market quickly.
    Super low noise level
    Excellent heat pump structure makes noise control at super low level.
    Support by Link & Care platform
    Link & Care platform is developed by our team. It can be also OEM or ODM for our heat pump customers.
    Green clean technology
    The heat pump is increasingly important in energy saving industry all over the world.
    Easy maintenance and service
    Package design of heat pumps make the site installation and maintenance easy.
    Scroll to Top